Step B Enjoy
Playing a USB mass storage device
1 Make sure that your MCM128B is being powered on.
2 Press SOURCE repeatedly (or USB on the remote) to enter USB mode.
The LCD display shows- - - with USB DIRECT.
3 Plug a compatible USB mass storage device to MCM128B’s USB port marked 
.
If needed, use a suitable USB cable to connect between the device and MCM128’s USB port. The device will automatically power on.
4 PressÉÅon your MCM128B to start playback.
5 Press 9 to stop playback.
Notes for USB usage:
Tip
Refer to the user manual supplied for the description about compatibility of USB mass storage device, and playability of the files stored on the USB device.
–This micro system is able to support most USB mass storage devices on the current market.
–In case this micro system fails to identify your USB device, please unplug it and then plug it again. For USB devices designed with batteries, if the problem remains, please ensure sufficient power supply to your USB devices by replacing/recharging the batteries.
–You may not be able to play bought tracks in your USB device through this system, such as those bought from the Apple iTunes or Microsoft PlaysForSure websites!
–This micro system is designed for playback of digital music formats MP3 and WMA only and does not support
–Never try to connect this micro system with your PC through a USB cable to avoid any possible damage!
2006 C Koninklijie Philips Electronics
N.V. All rights reserved.
http://www.philips.com |
