Philips MCM166/12 user manual Auto install radio stations, Set clock

Note

•Before pressing any function button on the remote control, first select the correct source with the remote control instead of the main unit.

•If you are not going to use the remote control for a long time, remove the batteries.

Auto install radio stations

When you connect the Micro Hi-Fi to the power supply for the first time, or no radio station is stored in this Micro Hi-Fi, Plug and Play is activated to store all available radio stations automatically.

1Connect the Micro Hi-Fi to the power supply.

»[AUTO INSTALL - PRESS PLAY] (auto install - press the PLAY button) is displayed.

2Press on the main unit to start installation.

»[AUTO] (auto) is displayed.

»The Micro Hi-Fi automatically store radio stations with sufficient signal strength.

»When all the available radio stations are stored, the first preset radio station is broadcast automatically.

Set clock

1Press and hold CLOCK/DISPLAY to activate the clock setting mode.

» The 12 hour or 24 hour format is displayed.

2

3

4

Press PROG repeatedly to select 12 hour or 24 hour format. Press CLOCK/DISPLAY to confirm.

»The hour digits are displayed and begin to blink. Press / to set the hour.