TUNER
CD PLAYER
Tuning to stations
CD |
|
|
TUNER |
|
|
BAND |
| SEARCH/TUNING |
POWER | TIMER | REPEAT/PR |
10 | 3 | 1 |
1.Press POWER to on, then select TUNER.
2.Press BAND once or more to select your desired waveband, FM or AM.
3.Tuning to stations:
•Press down on SEARCH/TUNING ∞ or § and release the button when the frequency in the dis- play starts running.
➜The radio automatically tunes to a station of sufficient reception.
•To tune to a weak station, press ∞ or § briefly and repeatedly until you have found optimal reception.
4.Repeat step 3 if necessary until you find the desired station.
PRESETS: programming tuner stations
You can store up to 40 radio stations in the memory (20 FM and 20 AM).
TIMER |
|
| SLEEP |
| TIME |
|
|
|
|
|
|
| |
CH | TRAC | MEMORY | REMAIN | STEREO |
|
|
|
| FM |
|
| MHz |
|
|
| PM |
|
|
| |
|
|
|
| KHz |
| |
|
|
|
|
|
| |
BAND |
|
| SEARCH/TUNING | PROG/CLOCK |
| |
POWER | TIMER |
| REPEAT/PRESET | DISPLAY | SLEEP | |
10 |
| 3 | 1 |
|
|
|
1.Tune to your desired station (see Tuning to sta- tions).
2.Press PROG/CLOCK to activate programming.
➜Display: MEMORY flashes and CH XX appears, where XX denotes a preset location.
3.Press REPEAT/PRESET once or more to select a preset number,
4.Press PROG/CLOCK to confirm.
➜Display shows: the preset number, waveband and the frequency of the preset station.
5.Repeat the above steps to store other stations.
Playing a CD
This CD player plays Audio Discs including CD- Recordables. Do not try to play MP3
TIMER | REPEAT |
| |
|
| ||
CH | TRACK |
|
|
CD | FM | AM |
|
|
| PM |
|
TUNER |
|
|
|
BAND |
| SEARCH/TUNING | PROG/CL |
POWER | TIMER | REPEAT/PRESET | DISPLAY |
10 | 3 | 1 |
|
1.Press POWER to on, then select CD.
2.Press OPEN•CLOSE to open the CD compartment.
3.Insert a CD with the printed side facing up and press OPEN•CLOSE to close the CD compartment.
➜Display shows: 
, and then the total track number and total playing time.
➜ | appears if no disc is inserted, or |
| you have inserted a |
➜ 01 and total playing time, if your CD contains |
Selecting a different track, ∞ / §
TIMER | REPEAT | SLEEP | TIME |
|
| ||
CH | TRACK MEMORY | REMAIN | STEREO |
| FM AM |
| MHz |
| PM |
| KHz |
|
|
|
BAND | SEARCH/TUNING | PROG/CLOCK |
During playback,
Briefly press ∞ or § once or repeatedly until you find your desired track.
During stop or pause,
Press 2; to start playback after your desired track is selected.
Finding a passage within a track
1.During playback, press and hold ∞ or §.
➜ The CD is played at high speed and low volume.
2.When you recognize the passage you want, release ∞ or §.
Selecting different playing modes: REPEAT
Before or during CD playback, you can select a
To improve radio reception
For FM, extend and adjust the AC power cord.
Helpful Hints:
–If you fail to execute any action within 7 seconds after pressing PROG/CLOCK, programming will stop and you will need to start again.
–You can erase a preset station by storing another frequency in its place.
To listen to a preset station
•Press REPEAT/PRESET once or more until the desired preset station is displayed.
| CH | STEREO |
|
|
| FM | AM | MHz |
|
|
|
|
| |
|
|
| KHz |
|
BAND |
| SEARCH/TUNING | PROG/CLOCK |
|
POWER | TIMER | REPEAT/PRESET | DISPLAY | SLEEP |
10 | 3 | 1 |
|
|
4. | Press 2; to start playback. |
| ➜ Display shows: the current track number, |
| elapsed playing time and 2. |
5. | To pause playback press 2;. Press 2; again to |
| resume play. |
| ➜ Time digits flash during pause. |
6. | To stop CD playback, press 9. |
Helpful Hints:
The CD playback will also stop when:
–the CD compartment is opened.
–the CD has reached the end
–you select another sound source.
REPEAT mode.
| REPEAT |
|
|
|
|
| TRACK |
|
|
|
|
BAND |
| SEARCH/TUNING |
| PROG/CLOCK |
|
POWER | TIMER |
| REPEAT/PRESET | DISPLAY | SLEEP |
10 | 3 | 1 |
|
|
|
•To repeat the entire CD or a program, press REPEAT/PRESET once.
➜Display: REPEAT appears.
•To repeat a current track, press REPEAT/PRESET twice.
➜Display: REPEAT flashes.
•Press 2; to start playback if you have selected REPEAT in the stop or pause position.
To resume normal playback
•Press REPEAT/PRESET once or more until REPEAT disappears from the display.
MAINTENANCE AND SAFETY
CD player and disc handling (see 2) | Safety Information (see 2) |
TROUBLESHOOTING
If a fault occurs, first check the points listed below before taking the set to repair. If you are unable to rem-
• | If the CD player cannot read CDs correctly, use a |
| cleaning CD to clean the lens before taking the |
| set to repair. |
• | The lens of the CD player should never be |
| touched! |
• | Don't expose the set, batteries, CDs or cassettes |
| to humidity, rain, sand or excessive heat. |
• | Clean the set with a dry cloth. Don't use any |
| cleaning agents containing alcohol, ammonia, |
| benzene or abrasives as these may harm the set. |
edy a problem by following these hints, consult your dealer or service center.
WARNING: Do not open the set as there is a risk of electric shock! Under no circumstances should you try to repair the set yourself, as this will invali- date the warranty.
• Sudden changes in the surrounding temperature |
can cause condensation on the lens of your CD |
player. Playing a CD is then not possible. Do not |
attempt to clean the lens, but leave the set in a |
warm environment until the moisture evaporates. |
• Always close the CD door to avoid dust on the |
lens. |
• To clean the CD, wipe in a straight line from the |
centre towards the edge using a soft, |
cloth. Do not use cleaning agents as they may |
damage the disc. |
• Never write on a CD or attach any stickers to it. |
• Place the set on hard and flat surface so that the |
system does not tilt. Make sure there is good |
ventilation to prevent the set overheating. |
• The mechanical parts of the set contain self- |
lubricating bearings and must not be oiled or |
lubricated. |
• Apparatus shall not be exposed to dripping or |
splashing. |
• Do not place any sources of danger on the appa- |
ratus (e.g. liquid filled objects, lighted candles). |
No sound/power
–Volume not adjusted.
• Adjust the VOLUME.
–Power cord not securely connected.
• Connect the AC power cord properly.
–Electrostatic discharge/interference.
•Unplug the set and remove battery from the battery compartment. Then, replug /replace battery. Try acti- vating the set again.
–CD contains
• Press SEARCH ∞ or § once or more skip the data file to a suitable audio track.
Severe radio hum or noise
indication
–No CD inserted.
• Insert a suitable disc.
–CD badly scratched or dirty.
•Replace/clean CD (See Maintenance).
– Laser lens steam up.
•Wait until lens has cleared.
and total playing time indication
–
•Use CD Audio discs only, or press SEARCH ∞ , § once or more skip the data file to a suitable audio track.
The CD skips tracks
Canada
English:This digital apparatus does not exceed the Class B limits for radio noise emis- sions from digital apparatus as set out in the Radio Interference Regulations of the Cana- dian Department of Communications.
Français: Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des Communications du Canada.
–Electrical interference: set too close to TV, VCR or computer.
•Move the set/ TV, VCR or computer to increase the distance.
Poor radio reception
–Weak radio signal.
• FM: Extend and adjust AC power cord.
–CD damaged or dirty.
•Replace or clean CD.
– Program is active
•Switch off program.
The set complies with the
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including interference that may cause undesired operation.
Environmental information
We have done our best to reduce the packaging and make it easy to separate into 3 materials: cardboard, expandable polystyrene, polyethylene.
Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging, dead batteries and old equipment.
