Philips MX975D English, SOURCE SELECTOR, SOURCE SELECTION, Reassigning a source selection, Using one source selection for two or more appliances

SOURCE SELECTION

SOURCE SELECTOR

When selecting a source by turning SOURCE SELECTOR, the audio and video inputs with the corresponding name are activated. The incoming signal is reproduced by all audio and

–if the source includes a video signal – video outputs of the receiver. It is possible to reassign a source selection to other than these standard inputs.

Source selected	........Connectors used
DVD...............................	COAX 1 digital audio input and
	DVD IN video input
PHONO..........................	PHONO IN audio input
TUNER ..........................	The tuner part of the receiver is used,
	all inputs are switched off.
CD .................................	CD IN audio input
CDR/TAPE .....................	CDR/TAPE IN audio input
TV..................................	TV IN audio input and
	no video input
VCR ...............................	VCR IN audio input and
	VCR IN video input
SAT ...............................	SAT IN audio input and
	SAT IN video input

Reassigning a source selection

If a source is selected with SOURCE SELECTOR the standard audio input is used. To change this, the source selection must be reassigned to another audio input.

Example: Reassigning CD from the analog CD IN audio input to the digital COAX 2 IN audio input.

1Choose * SELECT INPUT from the menu and press NEXT 2.

2Turn SOURCE SELECTOR to select the source which should be reassigned (e. g. CD).

yThe name of the source is displayed and the light of the source flashes.

3Turn X MENU NAVIGATOR to select the input connectors which should be used (e. g. CD -> COAX2).

4Press ENTER / OK to confirm your selection. ySTORED is displayed briefly.

5This source selection is now using the chosen audio input (e. g. CD uses the COAX 2 IN input connectors, COAX 2 lights when switching to CD).

Using one source selection for two or more appliances

You may assign more than one source to a source selection. This can be useful when products are connected one after the other in a chain.

Example: A VCR is connected to the TV but only the TV is connected to the receiver. Both SOURCE SELECTOR settings, TV as well as VCR, have to use the TV input connectors.

1Choose * SELECT INPUT from the menu and press NEXT 2.

2Turn SOURCE SELECTOR to select the source which should be reassigned (e. g. VCR).

yThe name of the source is displayed and the light of the source flashes.

3Turn X MENU NAVIGATOR to select the input connectors which should be used (e. g. VCR -> TV IN).

4Press ENTER / OK to confirm your selection. ySTORED is displayed briefly.

5This source selection is now using the chosen audio input (e. g. VCR uses the TV IN input connectors, VCR <TV IN> is displayed briefly when switching to VCR).

English