Philips NP2900 acquires the automatic IP address, 7Select Yes to connect to the Internet

5Select your network from the list of found networks and confirm.

6Enter the encryption key (if required) and confirm. (press CLEAR to delete last character entry /

press hold CLEAR to delete line entry) >> The player

acquires the automatic IP address;

shows the confirmation for the connection to the network; shows the prompt for the connection to the Internet.

7Select [Yes] to connect to the Internet.

>> The player shows the confirmation for the connection to the Internet.

You can go to section Enjoy and listen to Internet radio at this point.

Here is how to create a wireless connection any time ‘after’ the initial setup:

1Ensure that your network name and network password or encryption key are available.

2Turn on the player.

3Turn on your wireless access point or wireless router with broadband Internet access.

4Press SETTINGS, to go to the Settings menu.

5Select [Wireless (WiFi)] to start the network setup process.

•For wireless routers with Wi-Fi protection system (WPS) that supports push button configuration (PBC): On the router, press the WPS PBC push button (often displayed as ) to activate. On NP2900 press OK to confirm.

•For wireless routers with Wi-Fi protection system (WPS) that supports a personal identification number (PIN): On NP2900 select WPS PIN, then enter the displayed PIN on the router.

•For other wireless routers:

>> NP2900 searches for networks.

This icon indicates steps on your remote control!

en

7