Philips Energy Advantage
Ordering, Electrical andTechnical Data (Subject to change without notice)
|
|
|
|
| Color |
| Rated Average Life (Hrs.)1 | Approx. |
|
|
| |
Product | Ordering | Nom. |
| Pack. | Temp. | MOL | Initial | Design |
| Lumen | ||
Number | Code | Watts | Base | Qty. | (Kelvin) | (In.) | Start2 | Start3 | Lumens4 | Lumens5 | CRI | Maint. |
14 | 10 | 2700K | 511⁄16 | 12,000 | 16,000 | 1100 | 1010 | 82 | 88% | |||
14 | 10 | 3500K | 511⁄16 | 12,000 | 16,000 | 1100 | 1010 | 82 | 88% | |||
14 | 10 | 4100K | 511⁄16 | 12,000 | 16,000 | 1100 | 1010 | 82 | 88% | |||
21 | 10 | 2700K | 61⁄2 | 12,000 | 16,000 | 1525 | 1400 | 82 | 88% | |||
21 | 10 | 3500K | 61⁄2 | 12,000 | 16,000 | 1525 | 1400 | 82 | 88% | |||
21 |
| 10 | 4100K | 61⁄2 | 12,000 | 16,000 | 1525 | 1400 | 82 | 88% |
1)Rated average life is the length of operation (in hours) at which point an average of 50% of a large sample of lamps will still be operational and 50% will not.
2)Average life under specified test conditions with lamps turned off and restarted no more frequently than once every 3 operating hours. Lamp life is appreciably longer if lamps are started less frequently.
3)Average life under engineering data with lamps turned off and restarted once every 12 operating hours.
4)Approximate initial lumens.The lamp lumen output is based upon lamp performance after 100 hours of operating life, when the output is measured during operation on a reference ballast under standard laboratory conditions. For expected lamp lumen output, commercial ballast manufacturers can advise the appropriate ballast factor for each of their ballasts when they are informed of the designated lamp.The ballast factor is a multiplier applied to the designated lamp lumen output.
5)Design lumens are the approximate lamp lumen output at 40% of the lamp’s rated average life.This output is based upon measurements obtained during lamp operation on a reference ballast under standard laboratory conditions.
This lamp is better for the environment because of its reduced mercury content. All Philips ALTO® lamps give you
88% Lumen Maintenance
Philips Energy Advantage
100%
| 96% |
(%) |
|
Output | 92% |
Light | 88% |
| |
| 84% |
| 78% |
0 | 4,000 | 8,000 | 12,000 | 16,000 |
Lamp Operating Hours
Rated Average Life
Philips Energy Advantage
Programmed Start Ballast
BASED ON 3 HOURS PER START2
12,000
BASED ON 12 HOURS PER START3
16,000
0 | 4,000 | 8,000 | 12,000 | 16,000 |
Rated Average Life in Hours
D
|
|
|
|
|
|
|
|
|
|
|
|
| Dimensions |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 14W | 21W |
|
|
|
|
|
|
|
|
|
|
|
|
| A | |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
| A |
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
| C | ||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| B |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| D | |||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| C |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
© 2008 Philips Lighting Company. All rights reserved. Printed in USA 12/08
www. philips.com
Philips Lighting Company | Philips Lighting |
200 Franklin Square Drive | 281 Hillmount Road |
P.O. Box 6800 | Markham, Ontario |
Somerset, NJ | Canada L6C 2S3 |
A Division of Philips Electronics North America Corporation | A Division of Philips Electronics Ltd. |