Ensure the disc label is upwards, Clean the disc | Philips PET707

	TROUBLESHOOTING
Disc can’t be played	– Ensure the disc label is upwards.
	– Clean the disc.
	– Check if the disc is defective by trying
	another disc.

The player does not respond to the remote control

Distorted or B/W picture with DVD

No audio at digital output

Player does not respond to all operating commands during playback

Player feels warm

–Aim the remote control directly at the sensor on the front of the player. Avoid all obstacles that may interfere with the signal path. Inspect or replace the batteries.

–Use only discs formatted according to the TV-set used (PAL/NTSC).

–Check the digital connections.

–Check the SETUP menu to make sure that the digital output is set to on.

–Operations are not permitted by the disc.

–Refer to the instructions in the disc inlay.

–When the player is in use for a long period of time, the surface will be heated. This is normal.

Display goes dimmer when – The unit is saving power to ensure longer

AC is unpluggedplaytime with battery. It is normal. Adjust the brightness using MONITOR function.

This set complies with the radio interference requirements of the European Union.

Image 27

Philips PET707 user manual Ensure the disc label is upwards, Clean the disc, Another disc, Check the digital connections

Contents

PET706 Page Front View Functional Overview Main unit controls see figureFront of player see figure On . Power . OFF .....Switch the player on / off Volume controlHeadphones jack Remote controls see figure Remote Control Unpacking PlacementIntroduction Your portable DVD player Audio CD / MP3 CD Playable disc formatsDVD-Video Video CD Do not touch the lens Power SourcesSafety and maintenance General Information Copyright information Handling discsOn handling the LCD screen Environmental information Power supply Using the AC / DC adaptor Powering your remote controlPreparations Attaching and charging the battery pack Detaching the battery packSwitch off the set. Attach the battery pack as shown Connections Connecting headphones Connecting additional equipmentColor Yellow White Red TIP Digital Audio Out Menu navigation Remote control operationGeneral Explanation About this manual Select your preferred language and press OK Switching on for OSD language setupLoading discs and switching on Basic Functions Playing an audio or video CD disc Playing a DVD disc Playing a Jpeg discs Playing a MP3-CD Search General FeaturesMoving to another title / track / chapter Still picture and step frame Changing the audio output Slow motion Play modes Volume ControlProgram Use 0-9and OK to key in specific settings Repeat a B Changing the language Special DVD FeaturesDisc menu Camera angle OSD Operations General Setup Setup Operations Audio Setup Password SetupPreferences Troubleshooting Check the digital connections Clean the discEnsure the disc label is upwards Another disc Operating temperature range Technical Data How to connect a plug Mains plugCopyright in the U.K Mise AU Rebut DE Votre Ancien Produit Copyright InformationDisposal of Your OLD Product Information SUR LE Droit Dauteur Class Laser Product Second LCD screen Connect to headphone ContentControl elements Functional com Connection Ponents Power Sources Front of the player see figureRight side of the player see figure Hearing Safety Listen at a moderate volume Safety and maintenance Listen for reasonable periods of time On handling the LCD screen Environmental informationCopyright information Connect the power source to the primary DVD player using Use in a carUse at home Power on Connect to headphoneConnect to camcorder Screen brightness and contrast Volume control Primary device has been activated Make sure all the connected devices areAlready started on the primary device Make sure that the video out function on Disposal of your old product