Philips Portable DVD Player PET940
Quick start guide
1Charge
1Switch OFF the set.
2Connect the supplied adaptor to the set and the AC outlet.
3The RED light comes on.
4The battery pack will be fully charged in approximately 4 hours.When the RED light goes off, it means that the battery pack is fully charged.
TIP:You can operate the DVD player while charging. However, it takes longer time to fully charge the battery.
3
1
2
2Enjoy DVD
1Open the lid.
2Press and hold POWER.
3The GREEN light turns on.
4Open the DVD door by pushing the OPEN.
5Remove protective card (if any).
6Load the DVD disc.
7Close the DVD door and the set will automatically start to play.
8Use the control keys on the set or the remote control.
8
1
2
7
4
6 3
English
3Connect to TV
1Connect the set to the TV as shown.
2Please select an appropriate input or source on the TV. You can consult the owner’s manual of your TV. (If your TV does not have Audio and Video inputs, you will need to purchase a RF modulator. Please consult your dealer for more information.)
White
Red
Yellow
