Philips Portable DVD Player PET988
Quick start guide
1 Turn on
1 | Connect the AC power |
|
| adaptor to the player |
|
| and to the AC outet. |
|
2 | Slide the POWER | POWER |
| switch to ON to switch |
on the player.
2Set clock
1Press Settings for the setup menu.
2Select Clock and press 4.
3Select Set Time and press § to set time.
4Press OK to confirm.
5Select Set Date and press § to set date.
6Press OK to confirm.
2Remove the protective card (if any) and load a disc with the label side facing up.
3Close the disc compartment.
4Press Home to select switch to DVD mode. ➜Playback will start automatically. If not,
press 2;.
5To stop playback, press 9.
2Switch on the TV and set to the correct
➜You can consult the owner's manual of your TV. (If your TV does not have Audio and Video inputs, you will need to purchase a RF modulator. Please consult your dealer.)
Note:
You can:
–Press RELEASE PANEL on the right side of the player to slide the panel up.
–Press the top of the panel to slide the panel down.
–Adjust the viewing angle as shown.
Note:
–You need set clock again if you disconnect the power adaptor from the AC outlet.
3Enjoy (Disc operation)
1Push OPEN DVD DOOR to open the disc compartment.
4Enjoy (USB/SD)
1Insert a USB or SD card into the USB or SD slot on the player.
2Press Home to select switch to SD or USB mode.
3Play video/audio/picture files stored in the USB or SD card.
5Enjoy (AV OUT)
Connecting additional equipment (TV for example)
1Connect the AV OUT socket on the player to the video and audio sockets on a TV as shown directly.
TV
White
(Not
Red supplied)
Yellow
6Display clock
When watching DVD, listening to music or viewing photos, press 2;; the set will enter CLOCK mode automatically in about 30 seconds.
Printed in China | WK0839 |
