Philips PHDVR8L Macro Notes, To Delete a Macro, Macros, cont.Macros, To Setup a Macro

2322

To activate the Macro press and release the MACRO

button followed (within 20 seconds) by the digit button

1, 2 or 3.

Macro Notes

1. You might want to add “delays” in a Macro

sequence (e.g. to allow for your TV warm-up time).

Delays can be added by using the PAUSE button

followed by the number of seconds delay required.

For example, to enter a delay of 3 seconds, press and

release PAUSE followed by 3 (in step 4 of “To Setup a

Macro” on the previous page). Maximum delay is 9

seconds. It is not possible to have a “0” digit

entered after Pause i.e. there is no zero delay.

2. There is an automatic delay of half a second between

each IR transmission in a Macro sequence.

3. * The first button in a Macro sequence MUST be a

Mode button (TV, VCR, etc.).

To Delete a Macro

1. Press and hold the CODE SEARCH button until the

red indicator turns on. Release the CODE SEARCH

button.

2. Press and release the MACRO button. The red

indicator blinks off.

3. Press and release digit button 1, 2 or 3 for the Macro

you want to delete.

4. Press and hold the CODE SEARCH button. The red

indicator turns off and the Macro is deleted.

POWER

TV VCR CBL

SAT CD DVR

CODE

AM/

PREV. CHAN

DISPLAY

DVD

REPEAT

INFO

AUDIO

LEARN

CD TAPE TUNER

MACRO

1, 4.

Macros, cont.Macros

The MACRO button, in conjunction with digits 1, 2 and

3, lets you to program and store up to 3 sequences of IR

Commands (button-presses) of your choice. One press

of the respective Macro digit button results in that

sequence of IR commands being sent. Any sequence of

commands that you regularly perform can be reduced to

two button presses (MACRO button followed by digit 1,

2 or 3 button). For example pressing MACRO followed

by a single button can turn on your TV, turn on your

cable box, change to your favorite channel, turn on your

VCR, and tell it to record, etc. A total of 10 button

presses can be stored under each of the 3 Macro digits.

To Setup a Macro

1. Press and hold the CODE SEARCH button until the

red indicator turns on. Release CODE SEARCH.

2. Press and release the MACRO button. The red

indicator blinks off.

3. Press and release digit button where you want to

store the Macro, i.e. button 1, 2, or 3.

4. Press and Release Mode button for the first device

to be controlled in the Macro sequence. *

5. Press and release the buttons you want to be

included in the Macro, in the order you want them to

be sent (maximum of 9). The red indicator blinks off

with each button press.

6. To store the Macro, press and release the MACRO

button. The red indicator turns off. Note, if you

program the maximum of 9 buttons, the Macro will be

automatically stored on the 9th button press and the

red indicator turns off. Macro setup is now complete.