Clearing Commands
To Clear all Learned Commands under a mode
Clearing learned commands is helpful if, for example, you replace your CD player with another brand or model. If you had learned a feature from your old CD player’s original remote on to this remote (such as RANDOM PLAY), that feature would no longer work for your new CD player. Should you wish to remove or clear one or more “learned” commands, follow the steps below:
1.Press and hold the CODE SEARCH button until the red indicator turns on. Release the CODE SEARCH button.
2.Press and release the button for the mode you want to clear (TV, VCR, etc.). The red indicator blinks off.
3.Press and release the LEARN button TWICE. The red indicator blinks off.
4.Press and release the CODE SEARCH button. The red indicator turns off. All learned Commands under that mode are now cleared.
Master Clear - To Clear all Learned Commands under all modes
1.Press and hold the CODE SEARCH button until the red indicator turns on. Release the CODE SEARCH button.
2.Press and release the LEARN button TWICE. The red indicator blinks off.
3.Press and release the CODE SEARCH button. The red indicator turns off. All Learned commands in the remote are now cleared.
TV/VCR/INPUT
When in TV mode the TV/VCR/INPUT button performs the INPUT source switch function.
When in a mode that has been programmed for VCR the TV/VCR/INPUT button performs the TV/VCR antenna switch function.
When in a mode that has been programmed for Cable the TV/VCR/INPUT button performs the A.B switch function.
When in a mode that has been programmed for SAT the TV/VCR/INPUT button performs the TV/SAT switch function.
When in a mode that has been programmed for DVD the TV/VCR/INPUT button performs the DVD Setup function.
18
Troubleshooting
Remote does not operate your product.
•Press the mode button of the product you want to control.
•Program the remote with a new code.
•Install new batteries. (You might have to reprogram your remote after installing new batteries.)
•Remote may not be compatible with your product.
Remote does not operate some features of your product.
•Program remote with a new code.
•Remote may not be able to operate all features of your product or button names might be different than your product.
Red Indicator blinks after you program a product code.
•Remote did not accept the code.
•Try to program the code again or try a different code.
For help with setup, please call:
Limited Lifetime Warranty
The manufacturer warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with the specifications and warnings, for as long as you own this product. This warranty extends only to the original purchaser of the product, and is nontransferable. Defective products, together with the dated proof of purchase, must be returned to the place of purchase for repair or replacement. THEREARE NO OTHER EXPRESS WARRANTIES. Incidental and consequential damages are disclaimed where permitted by law. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Made in China. Quality Assured in USA.
Ledgewood, NJ 07852
19
