Philips SA2521, SA2526, SA2545, SA2515, SA2546, SA2525, SA2540 1Install, 2Connect, AInsert the battery

1Install

1Insert the CD supplied with your product into the CD ROM drive of your PC.

2Follow the on-screen instructions to complete the installation of Philips Device Manager.

2Connect

AInsert the battery

1 Remove the USB cap.	2 Remove the battery door	3 Inser the supplied AAA
	by sliding it in the	battery into the battery
	direction of the arrow.	compartment.

BRead the battery level indication of your player

The approximate power levels of your battery are indicated as follows:

Full Two-thirds full Half full Low Empty

Note When the batteries are almost empty, the low battery screen blinks. The player saves all settings and unfinished recordings and switches off in less than 60 seconds.

EN

5