13 Technical data

Power

Power supply: 220 mAh Li-ion polymer internal rechargeable battery

Play time¹

-Audio (.mp3): up to 22 hours

-Radio: up to 8 hours

Software

Philips Songbird: to update firmware and transfer music

Connectivity

Headphone 3.5 mm

USB 2.0 High speed

Sound

Channel separation: 45 dB

Frequency Response: 20 - 18,000 Hz

Output power: 2 x 2.4 mW

Signal to noise ratio: > 84 dB

Audio playback Supported formats: MP3:

MP3 bit rates: 8 - 320 kps and VBR

MP3 sample rates: 8, 11.025, 16, 22.050, 32, 44.1, 48 kHz

WMA:

WMA bit rates: 10 - 320 kbps CBR, 32 - 192 kbps VBR

WMA sample rates: 8, 11.025, 16, 22.050, 32, 44.1, 48 kHz

FLAC:

FLAC sample rates: 1 - 1,048 kHz APE:

APE sample rates: 8 - 48 kHz

WAV

Storage media

Built-in memory capacity²:

SA3RGA02 2GB NAND Flash

SA3RGA04 4GB NAND Flash

SA3RGA08 8GB NAND Flash

Music transfer³ Songbird (sync)

Windows Explorer (drag and drop)

Display

 

 

Color LCD 128 x 64 pixels

 

English

 

Note

 

 

 

 

 

 

 

 

 

¹ Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.

² 1GB = 1 billion bytes; available storage capacity is less. Full memory capacity may not be available as some memory is reserved for the player. Storage capacity is based on 4 minutes per song and 128 kbps MP3 encoding.

³ Transfer speed depends on operating system and software configuration.

System requirements

Windows® XP (SP3 or above) / Vista / 7

Pentium III 800 MHz processor or higher

512 MB RAM

500 MB hard disk space

Internet connection

Windows® Internet Explorer 6.0 or later

CD-ROM drive

USB port

EN 39

Page 39
Image 39
Philips SA3RGA08 Technical data, System requirements, Power, Flac sample rates 1 1,048 kHz APE APE sample rates 8 48 kHz