15EN
6 Update the firmware through Philips SongbirdSOUNDDOT is controlled by an internal
program called rmware. Newer versions of
the rmware may have been released after you
have purchased SOUNDDOT.
Through Philips Songbird, you can check for
and install rmware updates for SOUNDDOT
over the Internet.
Tip
•Your music les are not affected by a rmware update.
1 Make sure that you have connected your
PCto the Internet.
2 Connect SOUNDDOT to the PC.
3 On the PC , launch Philips Songbird.
• If necessary, click Start > Programs >
Philips > Philips Songbird.
4 Click SOUNDDOT in the Player pane.
Then, select Tools > Check for updated
rmware in the pop-up window.
» Philips Songbird checks for updates
from the Internet.
5 Follow the onscreen instructions.
» Downloading and installation of
rmware update start automatically.
» The SOUNDDOT restarts after the
rmware is updated and is ready for
use again.
Note
•Wait until the update is completed, then disconnect the
SOUNDDOT from the computer.