Philips SC940SBC, SBC SC940 Using your Bedtime Magic Room projector, Inserting slides, English

XP SBC SC940 17-02-2003 13:09 Pagina 5

ENGLISH 5

+	+
	+
	+

1Open the battery compartment (7) by turning the coin slot counter- clockwise.Approx. 1/4 turn. For this use a coin.

2Insert four AA batteries, noting the + and - configuration inside the battery compartment

3Put the battery compartment cover back in place.

4Close the battery compartment (7) by turning the coin slot clockwise.Approx. 1/4 turn. For this use a coin.

s

s

Using your Bedtime Magic Room projector

Positioning the Bedtime Magic Room Projector

•The Bedtime Magic Room Projector is fit for both wall and ceiling projection and can be positioned under any angle.

•You will get the best image quality if you place the projector between 1.5 and 5m (1.6 and 5.5 yards). from the wall/ceiling.

•The best projection quality is achieved in a dark room.

Inserting slides

The supplied slides are designed for different ages of your baby.Your baby will enjoy the projected images most if you choose an image that fits your baby’s age.

1Take the slide holder (5) out of the projector.

2Take the slide-wheel out of the slide holder and remove the printed disk (slide) from the slide-wheel (1).

3Insert the chosen slide into the slide-wheel. Make sure that the slide is positioned under the tabs at the edge of the slide-wheel.

4Put the slide-wheel back into the slide-holder (5).

5Put the slide-holder back into the projector with the little knob facing forward. Insert the holder unitil it clicks in position.