Philips SC486 manual Menu options, English, Nightlight, Lullaby, Sensitivity, Sound Alert

SC486_book.qxd 23-09-2004 18:22 Pagina 13

ENGLISH 13

3 Press the OK button (25) to confirm your selection.

4 Use the + buttons (18) to make adjustments and selections and press the OK button (25) to confirm.

>In some cases ‘Saved’ appears on the display to confirm that an adjustment has been stored.

5Press the MENU button (20) again to exit the menu.

Menu options

The options ‘Nightlight’ and ‘Lullaby’ can be operated via the keys on the sets as well as via the menu.The other options can only be operated via the menu. Each change in the menu set-up requires to press the OK button to confirm and to save the option.

Nightlight

Confirm ‘Light On?’ or ‘Light Off?’ to switch the nightlights on or off.

Lullaby

Confirm ‘Play?’ to replay the last played lullaby or ‘Stop Lullaby?’ to stop playback.

It is also possible to select a lullaby from the Parent Unit.

After Play, the + buttons should be pressed, ‘Select new’ is stated on the LCD screen, press OK to select the choice.

Sensitivity

Select the desired sensitivity level for the Baby Unit microphone: ‘Sensitivity 9‘ = minimum level / lowest sensitivity;

‘Sensitivity 9 9 9 9 9‘ = maximum level (continuous transmission) /

highest sensitivity.

When set to maximum level (continuous transmission), the Baby Unit monitors continuously and all sounds, regardless of level, can be heard on the Parent Unit. Battery operating time may decrease to approximately 12 hours during continuous transmission.

You can only change the Baby Unit microphone sensitivity if the connection between the Baby Unit and Parent Unit is established.

Sound Alert

Confirm ‘Alert On?’ or ‘Alert ‘Off ’. If Sound Alert is switched on, the Parent Unit beeps as soon as the second sound-level-light (25) lights red while the volume is switched off.