GETTING THE BEST FIT
1.Insert the relevant ear caps or foam sleeves into the left and right side of earphones.
2.Adjust the ear bud to a snug fit. (You may need to twist and slide it gently into your ears until a tight but comfortable seal)
3.To remove the headphones, grip the body of earphone and gently twist to break the seal. Do not pull on cable to remove.
Note: If the sound quality to be lacking in low frequencies (bass), check the tightness of the seal, or try another ear cap size.
GENERAL CARE
To clean the rubber caps, remove them from the headphones and wash under water with a mild detergent and air dry.
Note: Make sure you rinse and dry thoroughly before putting them back on the headphones.
If you notice any dirt present at the opening of headphones nozzle, remove the sleeves or caps and clear the obstruction by using the cleaning tool encased at the end of the wire loop.
Note: Do not force an object through as this will damage the sound filter.
Carrying case for storage and protection
1.Place the headphones in the case as shown.
2.Wind the cord around the guiding band.
3.Press the plug in place as shown.
MAINTENANCE AND PRECAUTIONS
1.Do not expose the earphones to extreme temperatures.
2.Select the right ear caps or sleeves for the best fit. Replace the parts if the condition deteriorates from wear and tear over time.
3.Avoid putting excessive weight or pressure on the headphones to prevent damage and malfunction.
4.Refrain from listening with the headphones in high volume, as this may affect your hearing.
TECHNICAL SPECIFICATIONS
As provided.
PACKAGE CONTENTS
As provided.
