SLV5400/05

Wireless TV link

Specifications Product highlights

Tuner/Reception/Transmission

•Antenna location: Picture & sound: Internal, RC
extender: External
•Frequency range: picture & sound: 2.4 GHz RC
extender: 433 MHz MHz
•TV system: PAL, SECAM
•Typical range indoor: 15-30 m
•Typical range outdoor: 100 m
• Remote control extender
•Supported IR carrier frequency: 32-57 KHz

Accessories

•AC/DC Adaptor: 2x 12VDC, 500mA
•Remote control: Slim Card, with Batteries

Dimensions

•Receiver dimensions (W x H x D):
146 x 146 x 62 mm
•Temperature (operation): +5ºC to +35ºC
•Transmitter dimensions (W x H x D):
270 x 146 x 62 mm

Power

•Power consumption: 15 W
•Power supply: AC/DC Adapter, 220-240V

Transmitter

•SCART 1: CVBS in, Audio L+R in
•SCART 2: CVBS in, Audio L+R in
•SCART 3: CVBS in, Audio L+R in, RGB in
•SCART 4: RGB, CVBS in/out, Audio L+R in/out
•SCART Out: RGB, CVBS out, Audio L+R out
•Audio out: RCA Stereo (Red/White)

Receiver

•SCART out: CVBS out, Audio L+R out
•
Issue date 2008-10-14
Version: 4.0.8
12 NC: 9082 100 05004
EAN: 87 10895 90450 6
© 2008 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
www.philips.com
Watch any device on a 2nd TV
The wireless link uses standard SCART and cinch plugs
that are used by almost every brand of audio/video
devices. If you device has one of these standard
connectors it works with the wireless link
Connect 4 devices
The easy way to switch between your DVD player,
satellite receiver, VCR or set-top box without having to
reconfigure your entire home cinema set-up. The wireless
TV link has four separate inputs, each with its own
SCART connector, to allow you to connect up to four
devices.
Choose 1 of 4 devices to watch
The easy way to switch between your DVD player,
satellite receiver, VCR or set-top box without having to
reconfigure your entire home cinema set-up. The wireless
TV link has four separate inputs, each with its own
SCART connector, to allow you to connect up to four
devices.
Works with DVD and many more
Extend your possibilities for viewing movies, sports events,
live performances and a range of TV channels anywhere
in your home. The wireless TV link is suitable for
transmission of AV content of all brands of PayTV and
Pay-per-View decoders, satellite receivers, set-top boxes,
DVD players, VCRs and camcorders.
Works on almost all brands
The wireless link uses standard SCART and cinch plugs
that are used by almost every brand of audio/video
devices.
One touch access to 4 devices
There 's n o ne ed t o sw ap c able s at the tra nsm itt er t o vi ew
any video device on the second TV. Simple press the input
selection button to switch from input device.
Operates in closed cabinet
If you store your audio/video devices in a cabinet, you
cannot operate these devices with a normal IR remote
control. The Philips wireless remote control link allows you
to operate these devices with the cabinet doors closed
thanks to an RF-based link that picks up the infrared
signals of a remote control and translates them into RF.
The receiver unit then translates them back to IR.
Record sources independently
You can record any A/V input source - regardless of what
you are watching on your main TV or on your second TV
- thanks to this record function. You simply instruct the
transmitter box which device should be recorded on your
VCR or DVD-R.
Wireles means no drilling
A 2.4 GHz wireless link between the receiver and
transmitter means you don't have to lay cables or drill
holes through walls.
Wireless goes through walls
There's no need to buy or rent duplicate A/V equipment.
The wireless RF system extends your possibilities for
viewing DVD movies and your favorite Satellite or TV
channels anywhere in you r home. With a range o f up to
30 meters inside the house, it delivers high-quality video
and stereo audio no matter where your second TV is
located.