EN
8
Installation
Installing the WebCam software
The software supplied only works on PC’s / laptop’swith the
operating systems Microsoft®Windows®98SE,ME, 2000 and XP.
Notes!
– Unplug all your USB devices (except USB keyboard and
USB mouse) before you start.
– Do not plug in your USB WebCam yet.Run the Installation CD-
ROM first.
– Have your Windows®CD-ROM at hand.
– The SPC900NC WebCam is 'XP Plug & Play'.This means if you are
running Windows XP and you have installed Service Pack 2 and
the latest Microsoft Windows XP updates you don't need to install
the SPC900NCWebCam driver. Simply plug in the WebCamand
you can start using your SPC900NCWebCam.
1Place the installation CD-ROM in your PC’s / laptop’s
CD-ROM / DVD drive.
> After a couple of seconds the the ‘Language selection’screen
appears automatically.
Note!
If the 'Language selection' screen does not appear automatically,
open the Microsoft®Windows®Explorer and double click on the
'Set-up.exe' icon in the CD-ROM directory.
2Select your language and click on the 'OK' button.
> The following screen appears.
3Select at least the ‘SPC900NC WebCam Driver’ and ‘Philips
VLounge Advanced’.
Click on the 'Next' button.