Philips SVA106 owner manual Index Search

38 Index Search

When you make a recording, the VCR places an index mark at the beginning of the recording. Essentially, an index mark is a type of “bookmark” for your tape. This feature is useful if you have sever- al different programs recorded on a single tape.

You may skip over programs by following the steps below. Before you begin, make sure:

●The VCR is on and is in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.)

●There is a tape in the VCR.

1

Press the MENU button repeatedly until the SEARCH SELECT menu appears.

SEARCH SELECT

→QUICK-FIND INDEX SEARCH TIME SEARCH

2

Press the PLAY button or the STOP button repeatedly to select INDEX SEARCH. Then, press the F.FWD button.

3

Within 30 seconds, press the PLAY button or the STOP button repeatedly until the number of programs that you want to skip appears beneath INDEX SEARCH on the screen.

This number should include the current program. For example, if you are currently viewing program 2 and you want to skip to pro- gram 5, select 03 to skip three programs (2, 3, and 4). Playback will begin at program 5. If you want to skip to program 1, select 02 to skip two programs (2 and 1). Playback will begin at program 1.

INDEX SEARCH		CURRENT PROGRAM
	--	Beginning	End
		of tape	of tape

Pro.1 Pro.2 Pro.3 Pro.4 Pro.5

02 01 01 02 03

INDEX MARK

4

While the number of programs is flashing, press the REWIND button or the F.FWD button.

The VCR begins rewinding or fast forwarding to the beginning of the desired program. When the program is reached, the VCR will start playback automatically.

INDEX SEARCH 03

D

POWER VCR/TV EJECT

1 2 3

4 5 6

7 8 9 CHANNEL

1	SPEED	0	+100
	SLOW	QUICK-	SEARCH
			TIME	INDEX
		FIND
	MENU	DISPLAY	EXIT	COUNTER
4			RESET	MEMORY
	REWIND	/ PLAY		F.FWD
	RECORD		/ STOP	PAUSE/STILL

32

Helpful Hints

•You may also activate the Index Search by pressing the INDEX SEARCH button. Then, continue from step 3.

•Every time an index mark is passed during rewinding or fast forwarding, the number of programs beneath INDEX SEARCH on the screen decreases by one.

•Up to 20 index marks may be searched.

•This function is not available during recording.

•Press the STOP button to stop the search.

•To exit Index Search mode, press the COUNTER RESET/EXIT button.

•The time gap between index marks should be greater than 1 minute for SP recording, 2 minutes for LP recording, and 3 minutes for SLP recording.

•If the end of the tape is reached during an Index Search, the VCR will cancel the search and rewind the tape. Details are on page 41.