Philips SWS2326W/17 user manual Introduction, Parts Required, Connection

EN

Introduction

Introduction

Congratulations on your purchase of PHILIPS Multi-video input A/V switcher. Your A/V switcher is designed to accept up to 4 signals from any AV equipment and deliver them to a TV or a Home Theater System. The switcher accepts video input signals from component, s-video or composite video sources and audio input signals from a stereo audio source to provide a single audio/video output to your TV. NOTE:The switcher can con- vert an s-video signal to composite video, and vice versa. But it can not convert component video signals.The switcher is designed to operate either in Manual mode or Automatic mode.

Parts Required

You will need the following items, not supplied with your AV switcher.

Stereo audio cable Component video cable OR S-Video cable OR Composite Video cables

Connection

Follow these steps to connect your AV Switcher.

• Connect one end of a video cable plug (S-Video, composite video or component video) to the output jack(s) of your video source then connect the other end of a video cable plug to any one of the input jacks on your AV switcher.

• Connect the stereo audio cable plugs between the audio out- put jacks of an audio source and the audio input jacks (red & white) on your AV switcher.

• Connect a video and an audio cable between the video and audio output jacks of the AV switcher and the video and audio input jacks of your TV.

• Connect DC power plug on the back of the unit and plug the 2-pin AC/DC power adapter to an 120VAC outlet.

Note: You must use matching cables for input and output con- nections in order for the unit to work properly. (for example, if you use a component video cable as an input, you must use a component video cable for output.)

2

5*6:6:PDQXDOSGI