Philips T-7000 Provided, Higher temperatures, Battery, Hours, Charging Base, Outlet, Short, Long

Models: T-6000 T-7000

1 4
Download 4 pages 3.39 Kb
Page 3
Image 3

To Charge/Recharge

Hair Length Selector

Trimmer Guard Attachment

• Use only the Charging Base

provided.

• (Re)charge at tempera-

tures between 40˚F and

95˚F. Charging at lower or

higher temperatures

adversely affects lifetime

of battery.

• Charging requires a full

10 hours.

• Recharging longer than

the required period of time

may range to 240V AC. Your new Trimmer Charging Base may be used with voltage ranging from 110-130V AC only.

1. Be certain Trimmer is OFF

 

(Fig. 1).

2.

Charge the Trimmer in the

 

Charging Base.

3.

Plug the cord of Charging

 

Base into the electrical

 

outlet.

NOTE:

1.The Charging Base can also be used to store the Trimmer.

2.In order to ensure the longest possible working life of the battery:

Do not charge for more

 

than 24 hours.

Do not keep the Charging

 

Base permanently plugged

 

in.

Trimmer Guard Attachment must be in place on the Trimmer in order to use the Zoom Ring.

Zoom Ring with Trimmer Guard Attachment ensures precise trimming and has 9 adjustable settings (see chart below).

Zoom Ring will “click” into position at each setting.

Start at a longer setting (#7, 8 or 9) to prevent accidentally trimming hairs too short (Fig. 3).

Trim against the direction of hair growth (Fig. 4)

As you become familiar with the settings, adjust Zoom Ring to desired trimming length.

To Remove

Remove Trimmer Guard Attachment if you are:

Defining hair lines

Trimming nape of neck

Removing single, unwanted hairs

1.

Be certain Trimmer is in the

 

OFF position.

2.

Hold Trimmer Base with

 

one hand, grasp sides of

 

Trimmer Guard Attachment

back onto Trimmer until it “clicks” into position.

NOTE: The Trimmer Guard Attachment can be placed on Trimmer only one way. If it does not fit properly, reverse it.

To Trim Beard

1.

Comb hairs outward so that

 

they are at their maximum

 

height and in the same

 

direction.

2.

With Trimmer Guard

the desired amount of hair.

To Trim Outer Edge of Beard & Add Definition

1.

Remove Trimmer Guard

 

Attachment.

2.

Hold Trimmer diagonally

 

with front of Trimmer facing

 

away from you (Fig. 7).

3.

Turn Trimmer ON.

4.

Start at chin and work back

 

toward ear.

5.

Follow line of jawbone to

will not harm Trimmer.

However, continuously

charging Trimmer will

reduce life of battery.

VOLTAGE

In North America, Central America, and South America, the most common voltage is between 110 and 130V AC. When traveling to other countries, common voltage

4. Green Charging Indicator

Light will light to indicate

Trimmer is (re)charging

(Fig. 2).

• Plug in the Charging Base

only when you hear the

sound indicating the

rechargeable battery will

be empty soon.

• Discharge the battery

completely once a year

by letting the motor run

until it stops.

3. If the battery is empty and

you want to trim your

beard, charge Trimmer for

#1

Stubble Length or Closely Cropped

.06 in./1.5 mm

#2

Short

.1 in./2.5 mm

#3

 

.16 in./4 mm

#4

 

.22 in./5.5 mm

#5

Medium

.3 in./7.5 mm

#6

 

.38 in./9.5 mm

#7

 

.48 in./12 mm

#8

 

.6 in./15 mm

#9

Long

.72 in./18 mm

and gently slide Attachment

off Trimmer (Fig. 5).

NOTE: Zoom Ring can be

on any setting when remov-

ing or replacing Trimmer

Guard Attachment.

To Replace

1.Be certain Trimmer is in the OFF position.

2.Hold Trimmer in one hand and replace Attachment

 

Attachment in place,

 

set Zoom Ring to desired

 

setting.

3.

Slide ON/OFF switch to the

 

ON position and begin trim-

 

ming (Fig. 6).

4.

Turn Trimmer OFF.

IMPORTANT: If using Trimmer without Trimmer Guard Attachment, use a slow, very light “skimming” technique to prevent trimming off more than

cut away longer hairs on

outer edge of beard.

6. Turn Trimmer OFF.

NOTE: Practice is best for

optimum results.

To Define Beard Line

1.Hold Trimmer vertically with front of Trimmer fac- ing you.

2.Start with trimmed edge of beard and with downward

1

2

9

8

76

54

3

12

at least 1.5 hours and you

will have enough power

for one use.

4. If the Trimmer hasn’t

been used for a long

period of time, Trimmer

must be recharged for a

full 10 hours.

3

9

8

7 6

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

9

 

 

 

 

 

 

7

 

 

 

 

 

 

6

 

 

 

 

 

 

5

 

 

 

 

 

 

4

 

 

 

 

 

 

3

 

 

 

 

 

 

2

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

6

7

Page 3
Image 3
Philips T-7000 Provided, Higher temperatures, Battery, Hours, Charging Base, Outlet, Than 24 hours, Sound indicating, Long