Philips T870 important safety instructions Replacing The Cutting Unit, Assistance, Storage

◗It is recommended that the Hair Collection Chamber be emptied and cleaned out after each use.

◗Do not operate the Trimmer with the Hair Collection Chamber removed.

Trimmer:

1Make sure the Trimmer is switched OFF and disconnected from the electrical outlet.

2Remove the Guide Comb Attachment.

3Remove the cutting unit (fig. 11).

4Clean the cutting unit and the inside of the Trimmer with the brush supplied (fig. 12).

5Re-attach the cutting unit and the Guide Comb into place on the Trimmer (fig. 13).

Replacing The Cutting Unit

If your cutters and filter become damaged or worn, do not continue using the Trimmer. Replace cutters and/or filter immediately.

This Trimmer has no other user-serviceable parts. Any other service should be performed by an Authorized Norelco Service Location.

Assistance

For Assistance or the Authorized Norelco Service Location nearest you, call toll free:

1-800-243-3050

or visit our website: www.norelco.com

Authorized Norelco Service Location information is available 24 hours a day, 7 days a week.

Storage

◗Be sure Trimmer is turned off and remove cord from outlet and Trimmer before storing in a safe, dry location where it will not be crushed, banged, or subject to damage.

◗Do not wrap cord around Trimmer when storing.

◗Store Cord in a safe location where it will not be cut or damaged.

◗Do not place or store Trimmer where it can fall or be pulled into a tub or sink, water or other liquid.