ENGLISH 13

C

C

4Clean the cutting unit and the inside of the Trimmer with the brush supplied.

5Close the cutting unit by pushing it back into place on the Trimmer until you hear a click.

Replacing The Cutting Unit

If your cutters become damaged or worn, do not continue using the Trimmer.

Replace cutters immediately.

1Open the cutting unit.

C 2 Remove the old cutting unit by pulling it upwards.

C

3Place the two notches of the new cutting unit into the guiding slots.

4Push the cutting unit back onto the Trimmer until you hear a click.

This Trimmer has no other user-serviceable parts. Any other service should be performed by an Authorized Norelco Service Location.

Page 17
Image 17
Philips T960 manual Replacing The Cutting Unit