1. General description

The TDA6107AJF contains three video output amplifiers which are intended to drive the
three cathodes of a color CRT. The device is contained in a plastic DIL-bent-SIL 9-pin
medium power (DBS9MPF) package, and uses high-voltage DMOS technology.
To obtain maximum performance, the amplifier should be used with black-current control.

2. Features

■Typical bandwidth of 5.5MHz for an output signal of 60 V (p-p)
■High slew rate of 900V/µs
■No external components required
■Very simple application
■Single supply voltage of 200 V
■Internal reference voltage of 2.5V
■Fixed gain of81
■Black-Current Stabilization (BCS) circuit with voltage window from 1.8V to 6V and
current window from +100 µA to−10 mA
■Thermal protection
■Internal protection against positive flashover discharges appearing on the CRT

3. Ordering information

TDA6107AJF

Triple video output amplifier

Rev. 02 — 28 April 2005 Product data sheet
Table 1: Ordering information
Type number Package
Name Description Version
TDA6107AJF DBS9MPF plastic DIL-bent-SIL medium power package with fin; 9 leads SOT111-1