9397 750 14728 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 02 — 28 April 2005 9 of 16
Philips Semiconductors TDA6107AJF
Triple video output amplifier
10. Application information10.1 Cathode output
The cathode output is protected against peak currents (caused by positive voltage peaks
during high-resistance flash) of 3 A maximum with a charge content of 100 µC. External
protection against higher currents is described in
Application note AN10227-01
.
The cathode is also protected against peak currents (caused by positive voltage peaks
during low-resistance flash) of 6 A maximum with a charge content of 100 nC. External
protection against higher currents is described in
Application note AN10227-01
.
The DC voltage of pin VDD must be within the operating range of 180V to 210 V during
the peak currents.
10.2 Flashover protection
The TDA6107AJF incorporates protection diodes against CRT flashover discharges that
clamp the cathodes output voltage up to a maximum of VDD+V
d.
Fig 8. Output voltage [pinsVoc(1),V
oc(2) and Voc(3)] falling edge as a function of the AC
input signal
51
49
Ov (in %)
t
t
mce476
150
140
100
60
50
2.34
2.96
1.73
Voc
(V)
Vi
(V)
tst
toc(f)
tco(p)