Smeg SER63LPG3 manual Adaptation To Different Types Of Gas, Instructions for the installer

Instructions for the installer

5 ADAPTATION TO DIFFERENT TYPES OF GAS

Before performing any cleaning or maintenance work, disconnect the appliance from the electrical socket.

The hob has been inspected for LPG at a pressure of 30 mbar.

5.1Removing the separable control panel (models with separable control panel)

1.Remove the knobs and the knob guard tube “A” by pulling them up;

2.Use a crosshead screwdriver to remove the screws and the two cylindrical supports “B”;

3.Raise the left-hand side of the control panel slightly and shift it to the right to remove it completely;

4.In models with electric hotplate, the body of the pilot light has to be removed to free the control panel;

5.2Removing the hob (models with integrated control panel)

1.Remove the knobs, the griddles, the burner caps, the flame caps and the two rear plugs;

2.Remove the screws “A” which fix the burner supports;

3.Raise the hob, sliding it off the ignition plugs and/or the thermocouples and the gas tap rods;

11