July 1994 2
Philips Semiconductors Product specification
1 W BTL mono audio amplifier with DC
volume control TDA7052A/AT
FEATURES
•DC volume control
•Few external components
•Mute mode
•Thermal protection
•Short-circuit proof
•No switch-on and off clicks
•Good overall stability
•Low power consumption
•Low HF radiation
•ESD protected on all pins
GENERAL DESCRIPTION
The TDA7052A/AT are mono BTL output amplifiers with
DC volume control. They are designed for use in TV and
monitors, but also suitable for battery-fed portable
recorders and radios.
Missing Current Limiter (MCL)
A MCL protection circuit is built-in. The MCL circuit is
activated when the difference in current between the
output terminal of each amplifier exceeds 100 mA (typical
300 mA). This level of 100 mA allows for headphone
applications (single-ended).
QUICK REFERENCE DATA
ORDERING INFORMATION
Notes
1. SOT97-1; 1996 September 10.
2. SOT96-1; 1996 September 10.
SYMBOL PARAMETERS CONDITIONS MIN. TYP. MAX. UNIT
VPpositive supply voltage range 4.5 −18 V
POoutput power
TDA7052A RL = 8 Ω; VP = 6 V 1.0 1.1 −W
TDA7052AT RL = 16 Ω; VP = 6 V 0.5 0.55 −W
Gvmaximum total voltage gain 34.5 35.5 36.5 dB
φgain control range 75 80 −dB
IPtotal quiescent current VP = 6 V; RL =∞−712mA
THD total harmonic distortion
TDA7052A PO = 0.5 W −0.3 1 %
TDA7052AT PO = 0.25 W −0.3 1 %
EXTENDED TYPE
NUMBER
PACKAGE
PINS PIN POSITION MATERIAL CODE
TDA7052A 8 DIL plastic SOT97(1)
TDA7052AT 8 mini-pack plastic SOT96A(2)