1998 Feb 23 2
Philips Semiconductors Product specification
3 W mono BTL audio amplifier with DC
volume control TDA7056AT
FEATURES
•DC volume control
•Few external components
•Mute mode
•Thermal protection
•Short-circuit proof
•No switch-on or switch-off clicks
•Good overall stability
•Low power consumption
•Low HF radiation
•ESD protected on all pins.
GENERAL DESCRIPTION
The TDA7056AT is a mono Bridge-Tied Load (BTL) output
amplifier with DC volume control. It is designed for use in
TVs and monitors, but is also suitable for battery-fed
portable recorders and radios. The device is contained in
a 20-lead small outline package.
A Missing Current Limiter (MCL) is built in. The MCL circuit
is activated when the difference in current between the
output terminal of each amplifier exceeds 100 mA
(300 mA typ.). This level of 100 mA allows for
Single-Ended (SE) headphone applications.
QUICK REFERENCE DATA
ORDERING INFORMATION
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
VPsupply voltage 4.5 −18 V
Pooutput power VP= 12 V; RL=16Ω3 3.5 −W
Gv(max) maximum total voltage gain VP= 12 V; RL=16Ω34.5 35.5 36.5 dB
∆Gvvoltage gain control range 75 80 −dB
Iq(tot) total quiescent current VP= 12 V; RL=∞− 816mA
THD total harmonic distortion Po= 0.5 W −0.3 1 %
TYPE
NUMBER
PACKAGE
NAME DESCRIPTION VERSION
TDA7056AT SO20 plastic small outline package with 20 leads; body width 7.5 mm SOT163-1