Philips TS2774C manual Direct Access Method

SETTING THE REMOTE CONTROL TO WORK WITH OTHER DEVICES
Direct Access Method
ow that you have looked up
Nthe three-digit Remote Code									2
Number for your brand of device,
you are ready to follow the five			1			SLEEP
simple steps below.
Please read through steps 1-5						A/CH	STATUS/EXIT	CC	CLOCK
										4
before beginning.					TV	RECORD			TV/VCR
BEGIN					VCR	1	2		3
Place the TV/VCR/ACC					ACC
					3	4	5		6
Mode Switch in the proper posi-
tion.						7	8		9
Press the (A/CH) • RECORD
						SMART			SMART
button on the remote control and	VCR						0
release.									PICTURE
						SOUND
Press the SmartSound button						MENU			SURF
on the remote within 30 seconds,
then release.
Enter the THREE-DIGIT	Satellite Receiver
	or DBS, DVD
REMOTE CODE NUMBER
for your desired device. The
remote is now ready to send						VOL			CH
commands to the unit.							MUTE
Point the remote at the	Cable Converter
Device. Press the POWER button
on the remote to turn the unit
ON.
SMART HELP					5
Remember, if this doesn’t			POWER
	SLEEP		CLOCK
	A/CH	STATUS/EXIT	CC
work the first time, repeat steps			TV/VCR
	RECORD
	TV
	VCR
using the same remote code number.		ACC
				SMART
			SMART	PICTURE
			SOUND		SURF
If after a second try and the remote			MENU
does not operate your device, see if					CH
				VOL	MUTE
there is another three-digit code num-
ber (pages 33-34) listed for your
device and repeat the steps above
using the new number.
If after repeated attempts and the
direct access code number method
does not work your device, try the
SEARCH METHOD on page 32.