5
MANUAL
INSTALLATION
05 10
16 11
27 12
38 13
4 9 ...
(Selection Mode)
System
Search
Programme No.
Store
Manual installation
Searching for and storing TV channels is done channel by channel.
You must go through every step of the Manual Installation menu.
Selection Mode is only present and lights up if the country you selected also
offers the channel option (C-channels for aerial channels, S-channels for cable
channels).
You can choose either channel or frequency mode.
&Select the TV system
•Select the country or part of the world from where you want to receive the
TV channel.
If you are connected to a cable system, select your country.
éSearch for a TV channel
The frequency or the channel number increases until a TVchannel is found.
In case of poor reception, you can improve the reception by adjusting the
frequency with the Rkey.
Direct selection of a TV channel
If you know the frequency, or the C- or S-channel number, enter it directly
with the digit keys 0 to 9.
Ask for a list from your cable company or dealer, alternatively consult the
Table of frequencies on the inside backcover of this handbook.
“Enter the programme number with the digit keys.
‘ Store steps &till “
•Select Store and press the blue OK key.
Repeat every step to store another TV channel.
To exit from the menu :
•Press the red MENU key.
3104 305 4756.1.gb 28-05-1999 16:31 Pagina 5