3. MOUNT THE PROJECTOR ASSEMBLY TO THE PROJECTOR MOUNT
1:Place the projector assembly into the bayonet slots on the mount (small end into large end) and slide backward until the safety lever engages SEE FIG 4.
2:Adjust the thumb screws to secure the mount to the projector.
3:To remove, loosen the thumb screws and lift the safety lever to slide the unit out.
4:Adjust for best view and tighten all hardware.
Fig 4 | Bayonet Sub Assembly | Safety lever | Locking thumb screw |
| Projector assembly |
| |
5
