Philips VRX364AT warranty Hi-Fi Stereo Sound System, Press the Number 3 button to select Audio OUT

52 Hi-Fi Stereo Sound System

Multi-Channel Television Sound System broadcasts are automati- cally recorded in Hi-Fi stereo sound. To play in Hi-Fi stereo tapes recorded in Hi-Fi stereo, however, you’ll need to follow the steps below.

1

Press the VCR button, then press the MENU button.

2

Press the Number 2 button to select VCR SET UP.

TO SELECT PUSH NO. SHOWN

1 REPEAT PLAY OFF

2ON SCREEN MODE

3AUDIO OUT

4LANGUAGE

5VCR PLUS+ REF. MAP

TO END PUSH EXIT

3

Press the Number 3 button to select AUDIO OUT.

TO SELECT PUSH NO. SHOWN

1	HIFI	ON
2	MONO

TO END PUSH EXIT

4

Press the Number 1 button to select HIFI. ON will appear to the right of HIFI on-screen.

TO SELECT PUSH NO. SHOWN

1	HIFI	ON
2	MONO

TO END PUSH EXIT

5

Press the STATUS/EXIT button to exit.

	POWER	EJECT
		SLOW
	PAUSE/STILL
	PLAY
–	REW	F.FWD +
5	STOP
	STATUS/EXIT	CLEAR
		MENU
	SPEED	MEMORY
	REC/OTR	JOG&
		SHUTTLE

1	VCR	TV	CBL/DSS	MUTE	3
4	1	2	3
	4	5	6	VOLUME
2	7	8	9
				CHANNEL
		0	+100
	VCR PLUS+
	/ENTER
		TIME		VAR. SLOW
	VCR/TV SEARCH

Helpful Hints

•All programs are automatically recorded in both Hi-Fi stereo sound and in monaural sound.

•The audio level of a tape recorded in Hi-Fi stereo will differ from the audio level of a tape not recorded in Hi-Fi stereo.

•Normally, HIFI should be selected from the AUDIO OUT menu for playback with Hi-Fi sound. But, you can change the selection to MONO if you want monaural audio play- back. To do this, follow steps 1 - 3 above. At step 4, press the Number 2 button to select MONO. Press the STATUS/EXIT button to exit. HIFI will disappear from the status display.

•If you play non-Hi-Fi tapes while the VCR is set to HIFI, HIFI will disap- pear from the status display and the tape will play in monaural sound.

See page 55 for more hints.