VRZ241(H1795).QX33 4/9/99 9:17 AM Page 22
22 On-Screen Status Displays
A status display will appear when you press the STATUS/EXIT button or certain function buttons. The contents of the status dis- play will vary. To choose the status display mode, follow the steps below.
If you select STATUS ON, then select COUNTER ONLY ON:
●Whenever you press the STOP/p button or the PLAY/o but- ton, the status display will appear for five seconds. After five seconds, only the counter will remain
press the STATUS/EXIT button to remove it.
If you select STATUS ON, then select COUNTER ONLY OFF:
●Whenever you press the STOP/p button or the PLAY/o but- ton, the status display will appear for five seconds.
If you select STATUS OFF:
●The status display will not appear when you press function but- tons. You must press the STATUS/EXIT button to see the sta- tus display.
1
Press the VCR button, then press the MENU button.
2
Press the PLAY/o button or the STOP/p button to select VCR SET UP, then press the F.FWD/B button.
3
Press the PLAY/o button or the STOP/p button to select ON SCREEN MODE, then press the F.FWD/B button.
4
Press the PLAY/o button or the STOP/p button to select STATUS, then press the F.FWD/B button so that OFF (or ON) appears beside STATUS.
SELECT op CHOOSE B
→ STATUS | [ON] |
COUNTER ONLY | [OFF] |
TO END PUSH EXIT
5
If you set STATUS to OFF, go to step 6. If you set STA- TUS to ON, press the PLAY/o button or the STOP/p button to select COUNTER ONLY, then press the F.FWD/B button so that OFF (or ON) appears beside it.
6
Press the STATUS/EXIT button.
Status Display (example only)
Button
Pressed |
| Time | ||||
|
|
|
| |||
|
|
|
|
|
|
|
STOP |
| 12:00 AM | ||||
|
|
|
| CH10 | ||
SLP | M 1:23:45 |
| ||||
|
|
|
|
|
| |
|
|
|
| Channel | ||
Tape | Counter | |||||
Speed | and | |||||
|
|
| Counter | |||
|
|
| Memory | |||
Helpful Hints
•If the channel you select has no broadcast, the screen will become solid blue.
•You may not access a status display when viewing a still picture, during slow motion playback, or when the F.FWD/B or REW(ind)/s button is pressed during playback.
