Phoenix Gold Care and Cleaning, Connecting the Speakers to Your Audio System, ATR5 Specifications

Models: ATR5 Waterproof Sealed Fiberglass Cabinet Acoustically Transparent Aluminum Grill Rubber Surround on Poly Cone Woofer ATR6

1 2
Download 2 pages 15.82 Kb
Page 2
Image 2

Care and Cleaning

The weathering which occurs in your yard will add to the natural look of the speakers. However, if you wish to clean them use only a damp cloth or paper towel. The stream from your hose or pressure washer will damage the drivers in your ATR speakers. Cleaning and garden

chemicals should not be used on or near your speakers.

Connecting the Speakers to Your Audio System

The ATR5/6 speakers have convenient color coded wire terminations. The use of silicone sealant filled wire nuts rated for direct burial is recommended to prevent corrosion

and maintain a good connection. Common wire nuts may be used along with a silicone sealant applied separately.

Speaker wire is usually coded to maintain proper system

phasing. This can be by color coding, or one conductor

may have a printed marking or a rib along one edge that

will not be found on the other. You must carefully observe the positive terminal of the speaker output on your amplifier

is connected to the positive (red) wire of the ATR speaker. Likewise, the negative terminal of the amplifier’s speaker

output should be connected to the negative (black) wire of the ATR speaker.

To amplifier

-+

Wire Nut

 

Black ( - )

Red (+)

To speaker

ATR5 Specifications

Frequency Response

 

100 Hz to 20 kHz

Impedance

 

8 Ohm

Sensitivity

 

85dB, 2.83V

Recommended Amp Power

10 to 100 Watts Continuous

Woofer

 

5.25” Poly Cone w/Rubber Surround

Tweeter

 

5/8" Polycarbonate Dome Tweeter

Dimensions

10.5" x 9" x 7.5" (267mm x 229mm x 190mm)

Weight

 

6.9 lbs (3 kg)

ATR6 Specifications

 

Frequency Response

 

80 Hz to 22 kHz

Impedance

 

8 Ohm

Sensitivity

 

89dB, 2.83V

Recommended Amp Power

10 to 100 Watts Continuous

Woofer

 

6.50” Poly Cone w/ Butyl Rubber Surround

Tweeter

 

3/4" Parachute Silk Dome Tweeter

Dimensions

12.25" x 9.5" x 9.5"(311mm x 241mm x 241mm)

Weight

 

8.3 lbs (3.8 kg)

Two Year Limited Warranty

Phoenix Gold, warrants this product against defects in materials and workman- ship for a limited period of time. For a period of two (2) years from date of original purchase, we will repair or replace the product, at our option, without charge for parts. Customer must pay for all labor charges associated with the removal and re-installa- tion of speakers for the limited period and all parts and labor charges after the limited warranty period expires. The limited warranty period for factory refurbished products expires after ninety (90) days from date of original purchase. This limited warranty applies only to purchases from authorized Phoenix Gold Retailers or Distributors. This limited warranty is extended only to the original purchaser and is valid only for consumers in the United States.

Consumers are required to provide a copy of the original sales invoice from an authorized Phoenix Gold Retailer or Distributor when making a claim against this limited warranty. This limited warranty only covers failures due to defects in materials or workmanship that occur during normal use. It does not cover failures resulting from accident, fire, flood, misuse, neglect, mis-handling, mis-application, alteration, faulty installation, modification, service by anyone other than Phoenix Gold, or damage that is attributable to Acts of God. It does not cover costs of transportation to Phoenix Gold or damage in transit. The customer should return his defective product, freight prepaid and insured, to Phoenix Gold only after receiving a Return Authorization.

Repair or replacement under terms of this warranty does not extend the term of this warranty. Should a product prove to be defective in workmanship or material, the consumer’s sole remedy will be repair or replacement as provided under the terms of this warranty. If the defective product is discontinued, Phoenix Gold may replace the product with an equivalent or superior product at its option. Any cost of re-installation (or repair of wall or ceiling surface) is the sole responsibility of the customer and that cost shall not be the responsibility of Phoenix Gold. Under no circumstances shall Phoenix Gold be liable for loss or damage, direct, consequential or incidental, arising out of the use of or inability to use the product. There are no express warranties other than described above.

Innovative Home Audio

Phoenix Gold 9200 North Decatur Street Portland, Oregon 97203

8100.0356A

Tel: 503.286.9300 Fax: 503.978.3381 Tech Support: 800.950.1449

Web: www.phoenixgold.com Email: support@phoenixgold.com

2007©

Page 2
Image 2
Phoenix Gold Care and Cleaning, Connecting the Speakers to Your Audio System, ATR5 Specifications, ATR6 Specifications

ATR5, Waterproof Sealed Fiberglass Cabinet Acoustically Transparent Aluminum Grill Rubber Surround on Poly Cone Woofer, ATR6 specifications

The Phoenix Gold ATR6 is a premium speaker designed to deliver an exceptional audio experience while meeting the needs of enthusiasts who demand both performance and durability. Constructed with a waterproof sealed fiberglass cabinet, the ATR6 is engineered to withstand the rigors of varied environments, making it a perfect choice for outdoor setups or spaces where moisture is a concern. This cabinet design not only enhances longevity but also improves sound integrity by reducing unwanted resonance.

One of the standout features of the ATR6 is its acoustically transparent aluminum grill. This innovative grill design serves a dual purpose: it protects the speaker while allowing sound waves to pass through without distortion. The result is a clearer, more accurate reproduction of audio across a wide range of frequencies. This is particularly beneficial for critical listening applications where clarity is paramount.

The ATR6 is equipped with a poly cone woofer that is optimized for performance. The rubber surround on the woofer is designed to provide superior flexibility and durability, allowing for better movement during high-output sound reproduction. This combination of materials not only enhances the longevity of the speaker but also contributes to improved bass response, ensuring that low frequencies are powerful and rich without sacrificing detail.

In addition to these core features, the ATR6 incorporates advanced technologies that enhance its overall performance. The speaker is designed with a sensitivity rating that allows it to produce high output with minimal power input, making it efficient for various audio applications. The design includes high-quality components that promote excellent dynamic range, allowing listeners to enjoy the full spectrum of sound from quiet whispers to booming bass.

Another important aspect of the ATR6 is its compatibility with a range of audio systems. Whether you're using it in a home theater setup or connecting it to a portable sound system, the ATR6 is adaptable and easy to integrate into any arrangement. Overall, the Phoenix Gold ATR6 is an impressive speaker choice for those looking for durability, acoustic transparency, and superior sound quality in a versatile package.