Subwoofer Owner’s Manual
SYSTEM DIAGRAMS
Dual 2 ohm Subwoofer
Ti212d2 MONOBLOCK SINGLE SUBWOOFER SYSTEM
SD600.1 + Ti212d2
All voice coils are wired in parallel for 1 ohm load. SD600.1 makes maximum power into 1 ohm load.
Toutes les bobines mobiles sont câblées en parallèle de 1 Ohms. SD600.1 faire puissance maximale en 1 Ohms.
--
++
Ti212d2 FOUR CHANNEL SINGLE SUBWOOFER SYSTEM
Ti800.4 + Ti65CX 4 ohm stereo front and Ti212d2 4 ohm bridged rear
Ti800.4 makes maximum power into a 4 ohm bridged load. Subwoofer is dual 2 ohm and wired in series for a final load of 4 ohm.
Ti800.4 faire puissance maximale en 4 ohm charge comblé.
Note: Ti600.4 can be substituted for Ti800.4 in this system. Wiring is the same.
Dual 2 ohm Subwoofer (wired in series)
-+
+-
--
++
SPECIFICATIONS
T/S Parameters: | Ti210d2 | Ti212d2 |
Re (Dcr) | .99 | .9 |
FS (Hz) | 37.2 | 30.5 |
|
|
|
Sd (SqM) | .037 | .053 |
BL TM | 8.1 | 8.8 |
Qms | 5.42 | 5.44 |
|
|
|
Qes | .82 | .61 |
|
|
|
Qts | .71 | .55 |
|
|
|
Vas (liters) | 12.7 | 39.6 |
Cms (uM/N) | 71 | 100 |
Mms (gms) | 206.81 | 271.91 |
|
|
|
SPL | 91dB | 91dB |
Impedance | Dual 2 | Dual 2 |
*Specifications subject to change
Specifications: | Ti210d2 | Ti212d2 |
RMS Power Handling | 600 watts | 600 watts |
PEAK Power Handling | 1200 watts | 1200 watts |
|
|
|
Xmax (Peak to Peak) | 40mm | 40mm |
|
|
|
Mounting Diameter | 8 7/8in - 226mm | 10 7/8in - 276mm |
|
|
|
Mounting Depth | 6in | 6 1/2in - 164mm |
|
|
|
© 2011 Phoenix Gold • www.phoenixgold.com