Using PCTV MediaCenter 300i hardware

ƒPlease connect an internal audio cable plug to the internal audio output of the board and the other plug to the internal audio input of your soundcard.

ƒPlug the board into the previously selected PCI slot. To do so hold the board at the top and push it down into the slot applying even pressure at both ends. Press down on the upper edge so that the board fits firmly in the slot.

ƒIf the board is not easily inserted into the slot, then please do not use force as this may bend the contact springs on the socket connector. Instead, remove the board and try to insert it once again.

After installation

ƒAfter you have inserted the hardware, firmly tighten the retaining bracket of the board on the back of the computer.

ƒNow place the cover onto your computer and connect the peripheral devices.

4