Side Burner
Control Valve
Control Valve
Assembly
Fuel Supply
Hose
4.The pressure regulator and hose assem- bly provided is factory set at an outlet pressure of 11 inches water column (.4 lb. per sq. Inch).
WARNING: Any attempt to adjust the regu- lator is dangerous and could create a situa- tion causing personal injury or property dam- age. Consult your L.P. gas dealer if you think the regulator is not working properly.
Type 1 Fuel
Regulator
The L.P. Fuel Supply System
(the fuel regulator and hose)
FUEL REGULATOR AND HOSE
The fuel regulator supplied is equipped with a Type 1 coupling nut. Do not attempt to con- nect to any other L.P. cylinder not equipped with a mating Type 1 cylinder valve. This grill is not to be used with any other cylinder con- nection device.
The fuel regulator and hose assembly with the Type 1 fitting supplied must be used with the appliance. Do not use a hose and regulator assembly other than the one supplied with the grill or a manufacturer’s replacement fuel pressure regulator assembly.
The Type 1 connection system has the follow- ing features:
1.The system will not allow gas to flow until a positive connection has been made.
2.The system has a thermal element that will shut off the flow of gas between 240°F and 300°F.
3.The system has a
L.P. GAS SUPPLY CYLINDER
L.P. Cylinders can be obtained at the store where you purchased your grill or from an authorized L.P. gas dealer.
Cylinder Control
Valve
L.P. Gas
Cylinder
NOTE:
L.P. Gas
Cylinder
NOT
INCLUDED
The L.P. Fuel Supply System
(L.P. gas cylinder)
L.P. GAS CYLINDER SPECIFICATIONS Any L.P.
6
