Pioneer A-109 manual Panel Facilities, Front Panel, 1POWER ÑOFF/ ON switch, 2VOLUME control

TAPE 1/

CD-R/MD

6

PANEL FACILITIES

[ FRONT PANEL ]

1 2 3 4

	STEREO AMPLIFIER	zÀ,?/	Direct Energy MOS
POWER
Ñ￿OFF _ON
SPEAKERS	BASS	TREBLE
PHONES			LOUDNESS
–	+	–	+

- 0 9 8 7

VOLUME

MINMAX

CD	TUNER	PHONO	LINE	TAPE 1/	TAPE 2
				CD-R/MD	MONITOR
BALANCE			INPUT SELECTOR
DIRECT					TAPE 2
					MONITOR
L	R

65

1POWER (ÑOFF/_ON) switch

Press to turn power to the unit ON and OFF.

2VOLUME control

Use to adjust the volume level.

3INPUT SELECTOR knob/indicators

Turn the knob clockwise or counterclockwise so that the indicator lights for your desired input source. Turning the knob clockwise causes the lit indicator to right. Turning counter- clockwise causes it to left.

CD : For compact disc playback with a CD player.

TUNER : For AM or FM broadcast reception with a tuner.

PHONO : For record playback with a turntable.

LINE : Set to this position when listening to the pro- gram from a component connected to the LINE terminals.

: For playback with a cassette deck, CD recorder or MD recorder connected to the TAPE1/CD-R/ MD terminals.

4TAPE 2 MONITOR button/indicator

Use when there is an adaptor component (graphic equalizer, etc.) or cassette deck connected to the TAPE2 MONITOR terminals.

On : Indicator lights when using the adaptor component or listening to the cassette deck.

Off : Indicator goes off when not in use.

NOTES:

•When no connections are made to the TAPE2 MONITOR terminals, or when they are not in use, be sure to set this switch to the off position. (No sound will be heard if it is set to the on position.)

•When the TAPE2 MONITOR indicator is on and the INPUT SELECTOR knob is not set to TAPE1/CD-R/MD, the signals which are input through TAPE2 MONITOR are then output at TAPE1/CD-R/MD REC OUT.