Key Finder
Component Parts and Features
7Display Unit
1Signal receptor
This receiver receives signals from a remote control.
2POWER button
Switches power ON/OFF.
3DIMMER button
Selects the brightness level.
5Volume control (–/+) buttons
Adjust the volume of the
Note:
•Never set the volume so high that you cannot hear outside traffic and emergency vehicles.
4WIDE/MENU button
Changes the method of enlarging 4:3 video to 16:9 video. Pressing this but- ton for 2 seconds, and displayed the setup function. Once the setup function is displayed, its function is switched each time the button is pressed.
6SOURCE button
Switches between sources.
7RESET button
Resets the microprocessor.
8
Outputs sound from audio equipment connected to this product.
9
