1 TouchA.MENU and AUDIO and then
touchLOUDNESS.
2 Touchato turn loudness on.
#Toturn loudness off, touch b.
3 Touchcor dto select a desired level.
Eachtime you touch cor dselects level in
thefollowing order:
LOW(low)MID (mid)HIGH (high)
Using subwoofer output
Thisunit is equipped with a subwoofer output
whichcan be turned on or off.
!Whenthe subwoofer output is on,you can
adjustthe cut-off frequency and the output
levelof the subwoofer.
1 TouchA.MENU and AUDIO and then
touchSUB WOOFER.
#Whenthe subwoofer controller setting is
PREOUTFULL, you cannot select SUB WOOFER.
2 Touchdto turn subwoofer output on.
#Toturn subwoofer output off, touch c.
3 Touchband then touch cor dto se-
lectthe phase of subwoofer output.
Touchdto select normal phase and
NORMALappears in the display. Touch cto
selectreverse phase and REVERSE appears in
thedisplay.
4 Touchband then touch cor dto ad-
justthe output level of the subwoofer.
Eachtime you touch cor dincreases or de-
creasesthe level of the subwoofer. +6 6is
displayedas the level is increased or de-
creased.
5 Touchband then touch cor dto se-
lectcut-off frequency.
Eachtime you touch cor dselects cut-off fre-
quenciesin the following order:
5080125(Hz)
Onlyfrequencies lower than those in the se-
lectedrange are output from the subwoofer.
Using non fading output
Whenthe non fading output settingis on, the
audiosignal does not pass through this units
lowpass filter (for the subwoofer), but is out-
putthrough the RCA output.
1 TouchA.MENU and AUDIO and then
touchNON FADING.
#Whenthe subwoofer controller setting is only
PREOUTFULL, you can select NON FADING.
(Referto page 75.)
2 Touchato turn non fading output on.
#Toturn non fading output off, touch b.
3 Touchcor dto adjust the output level
ofthe non fading.
Eachtime you touch cor dincreases or de-
creasesthe level of the non fading. +6 6is
displayedas the level is increased or
decreased.
Using the high pass filter
Whenyou do not want low sounds fromthe
subwooferoutput frequency range to play
fromthe front or rear speakers, turn the HPF
(highpass filter) on. Only frequencies higher
thanthose in the selected range are output
fromthe front or rear speakers.
Audio Adjustments
En 59
Section
13
AudioAdjustments