Section |
|
|
| |
18 |
| Audio adjustments |
|
|
| 1 | Press the home button to switch to the | 5 Touch the table to adjust the level of the | |
| ||||
| ||||
| home display. | equalizer band. | ||
|
|
| Range: +12dB to | |
2 | Touch the audio function key to open the |
|
| |
| audio menu. | Using the | ||
|
|
|
Audio adjustments
Adjusting loudness | 7 Touch cor dnext to Frequency to select | |
Loudness compensates for deficiencies in the | the | |
Only frequencies lower than those in the se- | ||
volume. | ||
lected range are outputted from the subwoofer. | ||
|
3Touch Graphic EQ on the audio function menu.
# You cannot select or adjust the equalizer curves of Custom1 and Custom2 when using the auto- equalizer.
4Touch the desired setting.
Adjusting the
You can adjust the level of each band for the equalizer curves.
!A separate Custom1 curve can be created for each source. If you make adjustments when a curve other than Custom2 is se- lected, the equalizer curve settings will be stored in Custom1.
!A Custom2 curve that is common for all sources can be created. If you make adjust- ments when the Custom2 curve is selected, the Custom2 curve will be updated.
1Press the home button to switch to the home display.
2Touch the audio function key to open the audio menu.
3Touch Graphic EQ on the audio function menu.
4Touch the desired setting.
The
You can turn the
If you connect an optional microphone to this unit, you can use this function.
1Press the home button to switch to the home display.
2Touch the audio function key to open the audio menu.
3Touch Auto EQ to turn the
# You cannot use this function if auto EQ has not been carried out.
Using sonic center control
Sound that is suited for the listening position can easily be created with this function.
1Press the home button to switch to the home display.
2Touch the audio function key to open the audio menu.
3Touch Sonic Center Control on the audio function menu.
4Touch or to select a listening position. Range: Left 7 to Right 7
1 Press the home button to switch to the | Boosting the bass | |
home display. | ||
2 Touch the audio function key to open the | You can boost the bass level. | |
| ||
audio menu. | 1 Press the home button to switch to the | |
| ||
3 Touch cor dto select a desired level for | home display. | |
| ||
loudness. | 2 Touch the audio function key to open the | |
Off | ||
audio menu. | ||
| ||
Using subwoofer output | 3 Touch cor dto select a desired level. | |
This unit is equipped with a subwoofer output | Range: 0 to +6 | |
| ||
which can be turned on or off. | Using the high pass filter | |
! The | ||
adjusted when the subwoofer output is on. | When you do not want low sounds from the sub- | |
| ||
1 Press the home button to switch to the | woofer output frequency range to play from the | |
front or rear speakers, turn on the HPF (high | ||
home display. | ||
pass filter). Only frequencies higher than those | ||
| ||
2 Touch the audio function key to open the | in the selected range are output from the front | |
or rear speakers. | ||
audio menu. | ||
| ||
3 Touch Subwoofer on the audio function | 1 Press the home button to switch to the | |
home display. | ||
menu. | ||
| ||
4 Touch On or Off next to Subwoofer to | 2 Touch the audio function key to open the | |
audio menu. | ||
turn the subwoofer output on or off. | ||
| ||
5 Touch Normal or Reverse next to Phase | 3 Touch cor dnext to the frequency to se- | |
lect | ||
to select the phase of subwoofer output. | ||
Off | ||
| ||
6 Touch cor dnext to Level to adjust the | 125Hz | |
Only frequencies higher than those in the se- | ||
output level of the subwoofer. | ||
lected range are output from the front or rear | ||
Range: +6 to | ||
speakers. | ||
|
34 En