Basic operation on the map screen
Basic items on the map
Selecting the AV source
1 Display "AV Source" menu and touch the key to select your desired AV source.
Playing your Apple iPod®
You can control an iPod by connecting the USB interface cable for iPod®
Pairing your phone
Transferring the phone book
Information for the next guidance point Current time Compass Current route Current position Current road
The AV source is disabled if the equipment is not connected.
1 Touch AV1 Input on AV Settings menu to select "iPod".
2 Connect your iPod.
To AV input on the backside
Touch one of the categories in which you want to search for a song.
Touch to switch between the video screen and the music screen.
Playback control
Video control
1 Activate the Bluetooth function on your phone.
2 Touch the keys in the fol- lowing order in Top Menu; Phone ➔ Phone Settings
3 Turn Bluetooth On/Off to On.
1 Touch Phone Book
Transfer on Phone Menu.
2 Touch OK to enter the
Scrolling the map
Dragging the map allows scrolling. The scroll speed will change depending on your drag speed.
3D map screen
Touch
to change the view, touch the key again to return the previous view.
Playing files from a SD memory card
You can play an audio and video file on a SD memory card. (For details about playable files, refer to “Operation Manual”.)
Touch Video to switch to the
4 Touch the keys in the fol-
waiting screen.
3 Operate your phone to transfer the phone book entries during waiting screen.
Touching the 3D map shows the key for changing the 3D map tilt and rotation angle.
1 Push the dummy SD card until it clicks and pull out the card.
2 Insert your SD memory card until it clicks.
3 Touch keys to operate the music/video source.
Playback control
Move to the previous or next folder.
Switch to the screen for video control.
USB connector
3 Switch the AV source to iPod.
Music control
lowing order;
Connection ➔ Add Device
➔Search devices
The system tries to find and lists nearby devices.
5 Touch your phone on the list and then enter the PIN code from your phone. (1111 is default.).
When the pairing is success- ful, the message will appear.
4 After transferring, touch OK.
When the transferring is suc- cessful, “Completed data loading!” will appear.
