Basic operation
Chapter
02
If data related to map data, such as customized POI data, is stored on the SD memory card, operating procedures are slightly differ- ent.
1Press the hbutton and then touch [Eject SD].
2Touch [Yes].
The navigation system restarts, and a message prompting you to remove the SD memory card appears.
possible to recover the data. Pioneer accepts no liability for damages, costs or expenses arising from data loss or corruption.
Plugging in a USB storage device
%Plug a USB storage device into the USB and
USB and
USB storage device
pCompatibility with all USB storage devices is not guaranteed.
This navigation system may not achieve op- timum performance with some USB sto- rage devices.
pConnection via a USB hub is not possible.
Unplugging a USB storage device
operation Basic
3Eject the SD memory card while the message is displayed.
Eject the SD memory card before touching [OK].
%Pull out the USB storage device after checking that no data is being accessed.
4 Touch [OK].
The navigation system restarts.
Plugging and unplugging a USB storage device
CAUTION
!To prevent data loss and damage to the sto- rage device, never remove it from this naviga- tion system while data is being transferred.
!If data loss or corruption occurs on the sto- rage device for any reason, it is usually not
Connecting and disconnecting an iPod
CAUTION
!To prevent data loss and damage to the sto- rage device, never remove it from this naviga- tion system while data is being transferred.
!If data loss or corruption occurs on the sto- rage device for any reason, it is usually not possible to recover the data. Pioneer accepts no liability for damages, costs or expenses arising from data loss or corruption.
En 
19