Chapter

02Basic operation

Connecting your iPod

Startup and termination

Using the USB interface cable for iPod enables you to connect your iPod to the navigation system.

pA USB interface cable for iPod (CD-IU51V) (sold separately) is required for connection.

pFor details about iPod compatibility with this navigation system, refer to the informa-

tion on our website.

pConnection via a USB hub is not possible.

1Check that no USB storage device is connected.

2Connect your iPod.

1Start the engine to boot up the system. After a short pause, the splash screen comes on for a few seconds.

p To protect the LCD screen from damage, be sure to touch the touch panel keys with your finger only and gently touch the screen.

2Turn off the vehicle engine to termi-

nate the system.

The navigation system is also turned off.

On first-time startup

When you use the navigation system for the first time, select the language that you want to use.

1Start the engine to boot up the system. After a short pause, the splash screen comes on for a few seconds.

2Touch the language that you want to use on the screen.

USB and mini-jack con-

USB interface cable for

nector

iPod

Disconnecting your iPod

%Pull out the USB interface cable for iPod

after checking that no data is being ac- cessed.

3Touch the language that you want to use for the voice guidance.

The navigation system will now restart.

20 En