| Chapter |
Using traffic information | 10 |
pNotification icon shows the nearest traffic information on the route. However, if you touch [Diversion], the route is recalculated by taking into account not only this infor- mation, but also all traffic congestion infor-
mation on the route.
=For details, refer to Checking for traffic con- gestion automatically on the previous page.
#If you touch [List], the “Traffic on Route” screen appears.
#If you touch 
, the message disappears and the map screen returns.
Selecting traffic information to display
There are different types of traffic information that can be received via the
1Display the “Destination Menu” screen.
=For details of the operations, refer to Screen switching overview on page 22.
2Touch [Traffic].
The “Traffic Menu” screen appears.
3 Touch [Traffic Settings].
The “Traffic Settings” screen appears.
4 Touch [Displayed Traffic Info].
The “Traffic Type Settings” screen appears.
5Touch the traffic information item to display.
A check mark appears next to the selected traffic information.
#If you touch [All], you can select all entries. If you want to deselect all entries, touch [None].
6 Touch [OK].
The selected traffic information icon is added to the screen.
7 Touch [OK].
Selecting preferred
A default preferred TMC service provider for each country has been set. The navigation system tunes to the radio station with good reception among the preferred
1Display the “Destination Menu” screen.
=For details of the operations, refer to Screen switching overview on page 22.
2Touch [Traffic].
The “Traffic Menu” screen appears.
3Touch [TMC Provider Selection].
4Touch the desired service provider on the list.
After touching a service provider, the system starts tuning to the selected
provider. When the tuning is successful, the system returns to the map display.
information traffic Using
En 
55