❒Never touch the LCD screen with anything besides your finger when operating the Touch Panel functions. The LCD screen can scratch easily. (The stylus is supplied for special cali- brations. Do not use the stylus for normal operation.)
➲For details about handing the LCD panel ➞ Page 18
For comfortable LCD viewing
Due to its construction, the viewing angle of the LCD screen is limited. The viewing angle can be increased, however, by using [Brightness] to adjust the black density of the video. When using for the first time, adjust the black density in accordance with the viewing angle to adjust for clear viewing. [Dimmer] can also be used to adjust the brightness of the LCD screen itself to suit your personal preference.
Notes for Internal Memory
Before removing the vehicle bat- tery
If the battery is disconnected or discharged, the memory will be erased and must be repro- grammed.
➲For details, refer to “Returning the Navigation System to the Default or Factory Settings” in the Operation Manual.
Resetting the microprocessor
Pressing the RESET button mainly clears the settings for the AV source without clearing all the items of navigation functions. Please see section “Returning the Navigation Sys- tem to the Default or Factory Settings” of the Operation Manual before clearing.
Pressing the RESET button lets you reset the microprocessor to its initial settings without changing the condition memory.
➲Condition Memory ➞ Page 18
The microprocessor must be reset under the fol- lowing conditions:
— Prior to using this navigation system for the |
| |
first time after installation. |
| |
— If the product fails to operate properly. | Chapter | |
— When changing the combination of equip- | ||
— If there appear to be problems with the |
| |
operation of the system. |
| |
ment. | 1 | |
— When adding/removing additional products | Notes | |
that connect to the navigation system. | ||
Before | ||
1 Turn the ignition switch OFF. | ||
| ||
2 Press the RESET button with a pen tip or | UsingtheSystem | |
other pointed instrument. | ||
|
RESET button
❒If you have connected other equipment (for example, a TV tuner) to this navigation system, be sure to reset that equipment, too.
9
