Using the spikes
The speaker stand includes spikes that you can use to isolate the speaker from the floor. Spikes are recommended when placing the stand on a thick carpet (for added stability), or for better sound when placing the stand on a hard reverberant surface (such as a concrete or wood floor). Use the supplied spike bases to avoid scratching the floor or other surface where the stand is placed.
Attaching a speaker to the stand
To avoid accident or injury, please use screws to secure the speaker to the speaker stand. Note that there are fastening nuts provided on the speaker base (see below). Secure the speaker to the speaker support using the washer, spring washer and the 60 mm screws as shown below.
English
Stand base plate
1 Spike
2
Nut
Speaker base 
Speaker support 
Fastening nuts
Screw slots for securing speaker
Washers (SBE6008)
1Attach the spikes to the nuts provided.
2Attach all four spikes to the threaded metal inserts at the base of the speaker stand.
3Choose the location for speaker placement then put the spike bases on the floor.
4Place the stand so that the spikes are resting on the spike bases on the floor.
Before placing the speaker on the speaker stand, make sure the stand is stable and resting squarely on all four spikes.
•Note that these spikes are sharp metal and can cause damage to flooring. Make sure to lay down a cloth or suitable base before setting up.
•The spike bases should be placed as shown below (with the depression on the top side).
•Make sure to use the spike bases provided to avoid damaging the surface where you place the stand.
60 mm | Spring washer | |
(SBE6007) | ||
| ||
Black | Screws | |
(SBA6058) | (Bind head, M6xL60) | |
|
Cabinet and stand maintenance
•Use a polishing cloth or dry cloth to wipe off dust and dirt.
•If the cabinet or stand is very dirty, use a soft cloth dipped in some neutral cleanser diluted 5 or 6 times with water. Finally, wipe again using a dry cloth. Do not use furniture wax or cleaners.
•Never use thinners, benzine, insecticide sprays and other chemicals on or near the cabinet or stand, since these will corrode the surfaces.
3
En
