5.
1. This product
Note:
Depending on the kind of vehicle, the func- 2. Rear output 
tion of 3* and 5* may be different. If this is
the case, be sure to connect 2* to 5* and 4* to
1* |
| 3. Antenna jack |
3* | 2* |
|
5* | 4* | 6. Connect leads of the same |
color to each other. | ||
7. Cap (1*) |
|
|
When not using this terminal, |
| |
do not remove the cap. |
| |
4. Fuse
17. Fuse resistor
16. Power amp
(sold separately) 15. Connecting cords with 
RCA pin plugs (sold separately)
18.Yellow/black
If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections.
20. Blue/white
To system control terminal of the power amp. (Max. 300 mA 12 V DC.) 
8. Yellow (3*) | 9. Yellow (2*) |
To terminal always supplied | |
(or accessory) | with power regardless of |
| ignition switch position. |
10. Red (5*) | 11. Red (4*) |
Accessory | To electric terminal con- |
(or | trolled by ignition switch |
| (12 V DC) ON/OFF. |
19. Fuse holder
25. Rear speaker
+
≠
22. Blue/white (6*) | 23. Blue/white (7*) |
| To |
| (Max. 300 mA 12 V DC.) |
21.System remote control
25.Rear speaker
+
≠
26.Perform these connections when using a different amp (sold separately).
12.Black (ground)
To vehicle (metal) body.
13.ISO connector
Note:
In some vehicles, the ISO connector may be divided into two. In this case, be sure to connect to both connectors.
14. Speaker leads
White | : Front left + |
White/black | : Front left ≠ |
Gray | : Front right + |
Gray/black | : Front right ≠ |
Green | : Rear left + |
Green/black | : Rear left ≠ |
Violet | : Rear right + |
Violet/black | : Rear right ≠ |
24.
The pin position of the ISO connector will differ depends on the type of vehicle. Connect 6* and 7* when Pin 5 is an antenna control type. In another type of vehicle, never connect 6* and 7*.
DEH-2130R,2100R
65
