Advanced Operation
Using the CUE function
1In the pause mode, press the [CUE] button to set a cue point at the position at which playback is paused.
2When the [CUE] button is pressed during playback, playback returns to the cue point that was set directly before and pauses (Back Cue).
3After returning to the cue point, keep pressing the [CUE] button to continue playing (Cue Sampler).
Using the LOOP function
Manual looping
1During playback, press the [IN] button to set the loop in point.
2Press the [OUT] button to set the loop out point and start loop playback.
!When the [OUT] button is pressed during loop playback, loop play- back is canceled.
Auto looping
1During playback, turn the [AUTO LOOP] control to set the length for loop playback in number of beats.
2Press the [AUTO LOOP] control to start loop playback.
!The length of the loop can be changed by turning the [AUTO LOOP] control during loop playback.
!When the [AUTO LOOP] control is pressed during loop playback, loop playback is canceled.
—Pulse Mode Normal: The white illumination lights when the top of the jog dial is pressed.
!The illumination mode setting is not cleared when this unit’s power is turned off. When the power is next turned on, the unit starts in the mode that was set before the power was turned off.
Operation Advanced
Using the EFFECT function
Separate audio effects can be applied to the respective decks.
1Turn an effect parameter control while pressing the [SHIFT] button to select the effect type.
2Press an effect parameter button.
3Turn the effect parameter controls to adjust the parameters of the respective effects.
Switching the jog dials’ illumination mode
This unit is equipped with two types of illumination modes for the jog dials.
Press the [VINYL (PULSE MODE)] button while pressing the [SHIFT] button to switch the illumination mode.
—Pulse Mode Active: The offset of the beat grid is indicated by the white illumination of the jog dials. The illumination is brightest for the master deck and decks for which the beat grid matches. The jog dials’ illumination also lights in association with the operation of the [FILTER] control.
En 21